Dromex DG-HFM606 Cut Glove Level F Black/Grey XS-XXL EN388

Dromex DG-HFM606 Cut 6 Gloves are dexterous, lightweight mechanical protection gloves built for high cut-risk work where grip and hand control matter. With a multilayer nitrile-coated palm and fingers, they help protect against cuts, abrasion, tearing and punctures while maintaining a secure hold in oily conditions. They also provide brief contact heat protection for short touches on hot surfaces.

VERIFIED KEY FEATURES

• Cut-resistant mechanical glove with high cut performance for demanding handling tasks
• HCT (Hybrid Coating Technology) multilayer nitrile coating on palms and fingers for anti-slip grip and enhanced resistance to oil
• Designed to protect against cut, abrasion, tear and puncture hazards
• Contact heat protection on direct contact with a hot surface (up to 100°C for 15 seconds)
• 13-gauge seamless liner for a lightweight, dexterous feel
• Textured palm finish to support grip during precision handling
• Winged thumb construction for improved flexibility and movement
• Knit wrist for a secure fit and reduced debris ingress
• Skin-friendly: certified to OEKO-TEX® Standard 100 (tested for harmful substances)
• Colours: Black/Grey

BENEFITS (WHY THESE GLOVES WORK ON THE JOB)
When your day involves sharp edges, sheet materials, or repetitive handling, you need gloves that don’t fight your hands. The DG-HFM606 balances strong cut protection with the dexterity needed for precise work. The textured nitrile-coated palm and fingers help you keep control on oily or slick components, while the seamless liner supports comfort during long shifts. For operations where you may briefly touch warm surfaces, the glove’s contact heat capability adds another layer of practical protection without turning the glove bulky.

SPECIFICATIONS AND TECHNICAL DETAILS (CONFIRMED DATA ONLY)
Brand: Dromex
Model/Code: DG-HFM606
Product Type: Cut-resistant mechanical protective gloves
Colour: Black/Grey
Gauge/Construction: 13-gauge seamless liner with nitrile foam palm dip
Coating: HCT multilayer nitrile coating on palms and fingers; textured palm
Cuff: Knit wrist
Liner Materials (Fabric Composition): HPPE (high-performance polyethylene), glass fibre, steel, nylon, polyester, spandex
Key Performance Notes:

• Protection against cut, abrasion, tear and puncture hazards
• Enhanced resistance to oil and anti-slip grip on palm/fingers
• Contact heat protection up to 100°C for 15 seconds (direct contact)
  Standards & Ratings:
• EN ISO 21420:2020 (General requirements for protective gloves) – Dexterity level 5
• BS EN 388:2016 + A1:2018 (Mechanical risks) – 4X44F
• ANSI/ISEA 105 (2016) – Cut resistance A6
• Cutting resistance test method (TDM/ANSI): ASTM F2992/F2992M – 15
• OEKO-TEX® Standard 100 certified
  Approx. Glove Length Reference: Length of size 10 = 266 mm
  Packaging: Packaged as a pair in a polybag
  Storage Temperature Recommendation: Store in dry conditions at ambient temperatures between +2°C and +55°C
  Shelf Life: Up to 5 years when stored correctly (physical properties will not change)
  Care & Cleaning (Confirmed):
• Not suitable for dry cleaning or laundering
• Do not use bleaching/oxidising ingredients or fabric softeners
• Do not immerse in water
• Wipe dirty/stained gloves with a clean damp cloth and allow to air dry
• Store in original packaging in a cool, dry place out of direct sunlight and UV light
  Sizing Availability: XS to XXL (see size chart below)

HOW TO USE (SIMPLE)

1. Select the correct size for a snug, controlled fit (use the size chart as a guide).
2. Inspect both gloves before use to ensure there are no cuts, tears, or worn areas.
3. Put gloves on fully, ensuring the knit wrist sits securely to help keep out dirt and debris.
4. Use for handling tasks with mechanical cut/abrasion hazards and where grip is needed, including oily handling.
5. If gloves become damaged or show deterioration, remove and replace immediately.
6. After use, wipe off surface contamination with a damp cloth and allow to air dry before storage.

CUSTOMER REVIEWS

1. Lerato M. – “We handle sheet metal and sharp off-cuts daily. These gloves give solid cut protection without feeling stiff, and the grip stays reliable even when parts are oily.”
2. Johan V. – “Good balance between protection and finger control. I can still do precise fitting work, and the knit wrist keeps them seated properly.”
3. Ayesha K. – “Comfortable for long wear and they don’t feel heavy. Cleaning is easy—wipe down and air dry—and the palms keep a steady grip.”

FAQS

1. How do I choose the right size?
   Use the size chart below as a guide and aim for a snug fit that still allows full finger movement. If you are between sizes, choose the size that gives better control without tightness.
2. Are these gloves suitable for oily handling?
   Yes. The multilayer nitrile-coated palms and fingers are designed to be anti-slip with enhanced resistance to oil, supporting better grip when handling oily components.
3. Do they protect against heat?
   They offer contact heat protection for brief, direct contact with hot surfaces up to 100°C for 15 seconds. They are not intended for prolonged heat exposure.
4. Can I wash these gloves in a washing machine?
   No. They are not suitable for laundering. For cleaning, wipe with a clean damp cloth and allow to air dry. Do not use bleach, oxidising agents, or fabric softeners, and do not immerse in water.
5. Are these gloves chemical resistant?
   They are indicated for mild chemical handling use. They are not presented as a certified chemical-protection glove; select dedicated chemical-protection gloves when higher chemical exposure risk exists.
6. How long can I store these before use?
   When stored correctly in a cool, dry place, the gloves’ physical properties will not change for up to 5 years.

INDUSTRIES / WORKPLACE APPLICATIONS (UP TO 10)

• Automotive assembling
• Steel sheet handling
• Glass sheet handling
• Mining
• Construction work
• Oil and gas
• Mild chemical handling tasks
• Precision handling applications

SIZE CHART (CONFIRMED)
Sizes Available and Palm Length
DG-HFM606-7 | XS/S | Palm Length: 87 mm (±3 mm)
DG-HFM606-8 | S/M | Palm Length: 92 mm (±3 mm)
DG-HFM606-9 | M/L | Palm Length: 97 mm (±3 mm)
DG-HFM606-10 | L/XL | Palm Length: 100 mm (±3 mm)
DG-HFM606-11 | XL/XXL | Palm Length: 105 mm (±3 mm)

SECURE GRIP AND CUT 6 PROTECTION FOR SHARP, DEMANDING WORK
If your team needs dependable high cut protection without sacrificing dexterity, the Dromex DG-HFM606 is built for the job. The textured, nitrile-coated palm helps you keep control on slick or oily parts, while the lightweight seamless liner supports all-day comfort for precision handling in tough industrial environments