Description
WORKWEAR
STORM WETPRO THERMAL JACKET
PRODUCT INFO
CODE: DB-WETPRO-RT
- Collared jacket with internal hanger loop
- A concealed fixed stow away hood with drawstring fasteners and velcro closure for safety Prevents the hood from attaching to objects when not in use and promotes aesthetics
- A heavy-duty full non-metal zip front, with outer storm flap that has large plastic press studs for ease of use when wearing gloves
- An internal storm cuff prevents water from running down your sleeves
- There are 2 large waist pockets on the jacket with straight cut flaps, that prevents water from seeping into the pockets The utility/phone pocket with Velcro closure on the left breast secures and prevents your phone/pens from falling out when bending whilst the internal left breast pockets is useful in keeping your wallet etc from getting wet
- High visibility reflective tape on arms, wrist, shoulders, waist and breast provides enhanced high visibility when working in poor lighting environments Easy drying after washing due to the inner jacket water drainage system
SUITABLE FOR USE IN
- Exposure to rain, water, and cold environments used in general mining, outdoor and contractor applications.
SPEC SHEET:
Technical Datasheet DB WETPRO HI-VIZ RT THERMAL JACKET
Description
Dromex® STORM WETPRO-LNB storm and freezer wear jacket, is a two-tone high visibility thermal and water-resistant jacket protecting the body and undergarments from the hazards of rain, water splashes and cold temperatures. STORM WETPRO-LNB features an inner polyester quilted Taffeta lining that keeps the wearer warm, whilst the outer Polyester Oxford keeps the garment dry.
The jacket design consists of the following:
- Collared jacket with internal hanger loop.
- A concealed fixed stow away hood with drawstring fasteners and Velcro closure for safety. Prevents the hood from attaching to objects when not in use and promotes aesthetics.
- A heavy-duty chunky nylon open end zip with metal puller, outer storm flap that has large plastic press studs for ease of use when wearing gloves.
- An internal storm cuff to prevent water from running down your sleeves.
- There are 2 large waist jet pockets on the jacket with straight cut flaps, that prevents water from seeping into the pockets. The utility bellow pocket with Velcro closure on the right breast preventing the contents from falling out.
- Internal left breast pockets: useful in keeping your wallet etc from getting wet.
- High visibility reflective tape on arms, wrist, shoulders, waist and breast for enhanced high visibility when working in poor lighting environ-
ments. - Easy drying after washing due to the inner jacket water drainage system.
The STORM WETPRO is suitable for applications where there is exposure to rain, water, and cold environments used in general mining, outdoor and contractor applications.
Special Instructions
Do not use when working with chemicals.
This type of garment is not designed for warm working conditions.
Keep clear of open flames.
None of the materials or processes used in the manufacture of these products are known to be harmful to the wearer. The manufacturer has examined under the system for ensuring quality of
production by means of monitoring and inspection.
These jackets are designed to accommodate the basic safety requirements and standards for Personal Protective Equipment. The information contained herein is intended to assist the wearer in the selection of personal protective equipment. Actual conditions of use cannot be directly simulated in a test environment therefore it is the responsibility of the end user and not the manufacturer or supplier to determine the gloves suitability for the intended use. All jackets be should be thoroughly inspected before and after use to ensure no damage is present.
Compliance & Conformity
This jacket is designed for protection against foul weather increments only as per the EN directive 89/686/EEC. This garment meets the requirements of ergonomics, harmless materials, comfort, aeration, and flexibility as well as the water tightness of the garment.
Specifications
Style: Water-resistant, 2 tone, lime/navy blue reflective, thermal jacket with stow away hood.
Fabric composition: Outer fabric – 300D, 100% Oxford Polyester.
Inner fabric (lining) – 100% Polyester 190T Taffeta.
Padding – 180gsm 100% Polyester.
Storm cuff – 100% Polyester rib knit.
Reflective tape: 50mm Silver.
Mass: 180gsm.
Sizes Available
XS to 5XL.
