CODE: DH-FFM

• Polycarbonate anti-fog and impact resistant visor
• The Peripheral optical vision of 220°
• TPR (Thermo Plastic Rubber) 5-point adjustable head harness
• Large face seal flange
• High-efficiency exhalation valve
• Separate mask body
• Standard Dromex unifit filters
• Withstands a pull of 15kg
• One size fits all
• Designed to withstand temperatures of up to 70 ± 3°

Description

The Dromex® DHFFM full face mask provides the user with unparalleled vision, comfort and reliability protecting against hazardous vapours, gases and particulates, provided there is sufficient oxygen present in the contaminated atmosphere.

The Dromex® full face mask utilizes the Dromex® twin uni-fit cartridges and pre-filters only.

Special Instructions

All respiratory selections should be read in conjunction with BS EN 529:2005 “Respiratory Protective devices – Recommendations for selection, use, care and maintenance”.

Do not use these respirators or enter in areas where:

• The oxygen concentration is not known or is less than 19.5%.
• Contaminants or their concentrations are unknown or are known to be immediately dangerous to life or health.
• Particulate concentrations exceed levels fixed by the applicable health and safety regulations or protection factor 40 NPF whichever is lower.
• Gases and/or vapours are present except for respirators designated as protecting against vapours, in which case vapour concentrations should not exceed 20 NPF.
• The requirement for leak tightness is unlikely to be achieved if worn against a beard or facial stubble.
• Do not wear standard eye-glasses with a full-face respirator
• Not to be used for firefighting.
• These respirators do not supply oxygen. Do NOT use in oxygen-deficient atmospheres (e.g. tanks or other poorly ventilated areas).
• Do not use in explosive atmospheres.
• Do not modify or alter this device.

Compliance & Conformity

• NRCS Homologated to SANS 50136:1998 CL1 as required by the Occupational Health and Safety Act, 1993 (Act No. 85 of 1993).
• EN136:2008 approved: Respiratory protective devices full face masks —Requirements, testing, marking quality system as per ISO9001:2008.

Specifications

• Type: Class1 full face masks for light-duty use
• Material: Thermo Plastic Elastomer/Rubber
• Colour: Black
• Harness: 5-point comfort harness with 2 grip holes for easier fitting on and removing with gloves and accommodation of women’s hair (ability to wear a pony tail) Withstands a pull of up to 15KG or 150N
• Visor: Polycarbonate anti-fog and impact-resistant with peripheral optical vision of 220 degree’s (110 on the left and right).
• The natural field of vision is greater than the 70% specified of EN136:2008 standards.
• One size mask body: Accommodates small to large facial size’s
• Temperature: Designed to withstand temperatures of up to 70 ± 3°
• Lightweight dual filter cartridge system evenly distributes The weight of mask and cartridges on the face.