Hooks: Double Scaffolding Hooks
This is an elasticated, double leg, shock absorbing lanyard with two scaffolding hooks and a single snap hook connector that is engineered to attach to a dorsal D-Ring on a stand-alone, fall arrest harness.
The elasticated lanyard lifts the hooks off the ground when not in use, reducing the wear and tear caused to hardware when dragged on the ground. It further improves safety to the wearer by reducing the potential of the lanyard being caught in dangerous machinery.
This lanyard is recommended for those who are required to navigate obstacles whilst working at heights. The double leg lanyard improves safety to the wearer by allowing them to remain attached to at least one anchor point at all times, through the use of one hook, while moving the second hook around the obstacle to a new anchor point.
The built in shock absorber is engineered to reduce the total force experienced in a fall to a survivable force of less than 6kN.
WEBBING: 25mm UV-resistant polyester webbing with a minimum breaking load of 2,6 tonnes
LANYARD LENGTH: 1 750mm when shock absorber is intact.
– 3 450mm when shock absorber is fully deployed.
HOOKS: Corrosion-resistant steel hooks:
– Scaffolding hooks: 50mm gate opening with a min. breaking strength of 23kN
– Snap hooks: 20mm gate opening with a min. breaking strength of 22kN
MAX FALL WEIGHT: 140kg
SANS 50354 | EN 354
SANS 50355 | EN 355
Lead time of 4 to 6 weeks could apply