Description
KSE-LIGHTS KS-8001-DS SupaHERO Dualspot Hand Lamp
The KSE-LIGHTS KS-8001-DS SupaHERO Dualspot is an ATEX and IECEx certified explosion-protected hand lamp designed for use in hazardous gas, dust and mining environments. Featuring dual focus lens technology, up to 400 lumens output, a beam distance of up to 300 metres, inductive charging and IP68 protection, it provides reliable illumination for inspections, emergency response and industrial operations in challenging conditions.
Key Features
- 💡 ATEX and IECEx certified for Zone 0/21 and mining applications
- 💡 Dual focus lens optics for an exceptionally concentrated long-range beam
- 💡 Up to 400 lumens light output
- 💡 Beam distance up to 300 m
- 💡 Inductive contactless charging system
- 💡 Integrated emergency light function for power outages
- 💡 Flame-retardant, chemical-resistant PA66 GF housing
- 💡 IP68 dustproof and waterproof protection
- 💡 SmartClip attachment system
- 💡 Li-Ion rechargeable battery with more than 80% capacity remaining after 800 charge cycles
- 💡 Ergonomic design for use with gloves and protective equipment
Benefits
- ✅ Suitable for areas where explosive gases or combustible dust may be present
- ✅ Long-distance visibility for inspections, rescue work and emergency response
- ✅ Reliable operation in wet, dirty and demanding industrial conditions
- ✅ Reduced corrosion risk thanks to contactless inductive charging
- ✅ Chemical-resistant construction increases service life
- ✅ Lightweight design helps reduce user fatigue
- ✅ Emergency lighting capability improves safety during power failures
- ✅ Internationally recognised hazardous-area certification supports compliance requirements
Specifications
| Brand | KSE-LIGHTS |
| Model | KS-8001-DS |
| Series | SupaHERO Dualspot |
| Product Type | Explosion-Protected Hand Lamp |
| Light Output | Up to 400 lm |
| Beam Distance | Up to 300 m |
| Optics | Dual Focus Lenses |
| Light Source | Cree XP-G3 LED |
| Colour Temperature | 6000 K |
| Modes | 4 Modes |
| Runtime | 3.5 h (high), 4.5 h (medium), 10.5 h (low), 11 h (flash mode) |
| Battery | Rechargeable Li-Ion |
| Charging Method | Inductive / Contactless Charging |
| Charging Time | Less than 11 h |
| Protection Rating | IP68 (1 m for 30 min) |
| Housing Material | PA66 GF Glass-Fibre Reinforced Polymer |
| Colour | Yellow |
| Weight | 406 g |
| Product Dimensions | 68 mm x 65 mm x 200 mm |
| Operating Temperature | -15°C to +50°C |
| Certification | ATEX, IECEx |
| Individual Pack | Retail carton with lamp, snap hook and manual |
| Packaging Weight | 460 g including packaging |
| Packaging Dimensions | 75 mm x 65 mm x 210 mm |
| EAN Barcode | 0758176884473 |
How to Use
- Charge the hand lamp fully using the approved inductive charger outside hazardous areas.
- Press the power button to switch on the lamp.
- Cycle through the available lighting modes using the power button.
- Monitor battery status using the integrated status indicator.
- Use the SmartClip or carry by hand during inspections and operations.
- Clean the housing and lens with lukewarm soapy water after use.
⚠️ The KS-8001-DS may only be charged outside hazardous areas using the approved charger.
⭐⭐⭐⭐⭐ “The long beam distance is excellent for plant inspections and emergency response work.” — Michael S.
⭐⭐⭐⭐⭐ “Reliable in wet environments and easy to use while wearing gloves.” — David R.
⭐⭐⭐⭐⭐ “Very robust lamp with impressive hazardous-area certifications.” — Johan T.
FAQs
What hazardous areas is the KS-8001-DS approved for? It is certified for ATEX and IECEx Zone 0/21 applications and mining classifications specified by the manufacturer.
How far can the beam reach? The Dualspot optics provide a beam distance of up to 300 metres.
Does the lamp have an emergency lighting function? Yes. The lamp can automatically provide illumination during a power interruption when configured with its charging system.
Is the lamp waterproof? Yes. It carries an IP68 protection rating for dust and water resistance.
What material is the housing made from? The housing is manufactured from PA66 GF glass-fibre reinforced polymer with flame-retardant and chemical-resistant properties.
How is the lamp charged? The unit uses inductive contactless charging, eliminating exposed charging contacts.
What battery is used? The lamp uses a rechargeable Li-Ion battery system.
Is the charger included? Manufacturer technical documentation specifies the lamp is supplied without a charger.
Industries & Applications
- ⛏️ Mining operations
- 🛢️ Oil and gas facilities
- ⚗️ Chemical processing plants
- 🚒 Fire and rescue services
- ⚡ Utilities and power generation
- 🚢 Marine and offshore environments
- 🏭 Industrial maintenance and inspections
- 🚨 Emergency response teams
- 🌾 Dust-hazard environments
- 🔧 Hazardous-area engineering work
Compliance & Certifications
- ✅ ATEX Certified
- ✅ IECEx Certified
- ✅ II 1G Ex ia op is IIC T4 Ga
- ✅ II 2D Ex ia op is IIIC T150°C Db
- ✅ I M1 Ex ia op is I + H2 Ma
- ✅ EN 60079-0:2018
- ✅ EN 60079-11:2012
- ✅ EN 60079-28:2015
- ✅ IEC 60079-0:2017
- ✅ IEC 60079-11:2011
- ✅ IEC 60079-28:2015
The KSE-LIGHTS KS-8001-DS SupaHERO Dualspot combines certified hazardous-area safety, concentrated long-range illumination, rugged construction and advanced inductive charging technology. It is an excellent choice for professionals who require dependable performance in demanding explosive-risk environments.
