A1 – Single Unifit Filter (Nrcs: Az2011/70) (2 Cartridges Per Packet)

R127.58 Inc Vat

Pricing Includes VAT

Pricing Excludes Shipping Fees

For bulk orders - please request a quote and email us - [email protected]

Estimate lead time: While stocks last - lead time could apply of 3 to 5 days

Or split into 4x interest-free payments Learn more
Estimated Delivery Date April 2, 2024 - April 5, 2024

The estimate delivery date is just an estimate. If we have your order on hand, your order will be shipped the within 1 to 2 days, when your order is placed. Transit time vary from 1 to 3 days.

Description

RESPIRATORY RANGE

SINGLE UNIFIT FILTER

PRODUCT INFO

CODE: DHCS A1

  • Valve replaced with every filter
  • Individually sealed
  • Left hand thread for single
PRODUCT RATING
  • EN141:2000 (EN14387:2004 +A1 2008)
  • NRCS AZ2011/70
GASES
  • Organic

Dromex® DHCS-A1 UNIFIT lightweight reusable gas cartridges is used in conjunction with Dromex® single cartridge respirators (DH101), filtering organic gases and vapours with a boiling point greater than 65 degrees Celsius present in the atmosphere.

Dromex® DHCS-A1 cartridges can be used with Dromex® Pre-filters (DHCS P2PF only) providing protection against particulates and prolongs the life of the corresponding gas filter by adding additional protection against oil when working in greasy environments.

Special Instructions

All respiratory equipment should be read in conjunction with BS EN 529:2005 “Respiratory Protective devises – Recommendations for selection, use, care and maintenance”.

Do not use these cartridges or enter in area where:

  • The Oxygen concentration is not known or is less than 19.5%.
  • Contaminants or their concentrations are unknown or are known to be immediately dangerous to life or health. Particulate or gas concentrations exceed levels fixed by the applicable health and safety regulations.
  • The requirement for leak tightness is unlikely to be achieved if worn against a beard or facial stubble.
  • Not to be used for firefighting.
  •  Do not use in explosive atmospheres.

These cartridges do not supply oxygen. DO NOT use in oxygen deficient atmospheres (e.g. tanks or other poorly ventilated areas). The lifetime of a filter depends on many factors including the work rate, the air flow and the concentration of the contaminant in the atmosphere. A gas filter should be changed immediately when chemical breakthrough of a contaminant is detected by smell, taste or any other means. A dust filter should be changed when breathing becomes impaired.

The UNIFIT TWIN FILTER CARTRIDGE is for use with TWIN filter masks only.
DO NOT USE TWIN CARTRIDGES WITH DROMEX SINGLE MASKS.
Use genuine DROMEX UNIFIT gas cartridges and particulate pre-filters.

None of the materials or processes used in the manufacture of these product sare known to be harmful to the wearer. The manufacturer has examined under the system for ensuring quality of production by means of monitoring and inspection. These gas filters are designed to accommodate the basic safet requirements and standards for Personal Protective Equipment. The information contained herein is intended to assist the wearer in the selection of personal protective equipment.

therefore it is the responsibility of the end user and not the manufacturer or supplier to determine the pre-filter suitability for the intended use. All filters should be thoroughly inspected before use to ensure no damage is
present. Immediately discard once open inadvertently and if damaged (eg dents).

Changing Filter Cartridge

  • Remove pre-filter cover during use and unscrew filter cartridge.
  • Please note that the DROAIR SINGLE filter cartridge has a left-hand thread
  • Remove from the mask together with connector and dispose of the used components hygienically and safely.
  • Clean the half mask as per the instructions mentioned in section ‘cleaning and maintenance’.
  • Remove new Single UNIFIT filters, complete with valve from the wrapping, and replace the filters onto the mask.

Compliance & Conformity

  • NRCS Homologated as per SANS 10338:2009 as required by the Occupational
  • Health and Safety Act, 1993 (Act No. 85 of 1993), and the Mine Health and Safety Act, 1996 (Act No. 29 of 1996).
  • SANS 54387:2007, Respiratory protective devices – Gas filters and combined filters – Requirements, testing, marking,
  • NRCS Type Approval No: AZ 2011/70.
  • Approved for used with half masks as per EN140:1998.
  • CE EN approval as per BSI CE No. 0086.

Specifications

  • Style: Single cartridge, re-useable A1 gas filter
  • Breathing Resistance: @15 l/min >1.0 mbar, @47.5l/min >4.0 mbar
  • Gas Capacity: Break through time in minutes (BTT) min, Cyclohexane (C6,H12), BTT >70min @ 10ml/m3
  • Maximum Filter Capacity: Low 1000ppm
  • Additional: There are no metal fittings in this device. Each particulate filter is fitted with a new inhalation valve

Materials:

1. Grey Polystyrene filter case
2. Polyethylene terephthalate pre filter pad
3. Activated carbon
4. Polystyrene net support
5. Grey Polystyrene filter lid (back plate)
6. Grey Polystyrene valve seat
7. Rubber valve piece

SPEC SHEET:

Technical Datasheet DHCS-A1

We stock Jonsson and Dromex workwear and quality footwear brands. If there is items short on your order, that we do not have on hand, the lead times will be as follow:

Dromex items - If not in stock - lead time of 3 to 5 working days. Minimum order quantities will apply on non-stock items.
Pioneer items - if stock is available, 1 to 2 days lead time - Minimum order quantities will apply
Javlin items - lead time 5 to 7 days lead time,
All other brands - Rebel, Wayne, Bova, CAT, LeMaitre, SISI, Frams, Kaliber, PROFIT, Corporate Wear are subjected to availability. Please request availability before you make payment for your order. If the sizes requested are in stock lead time will be 2 to 4 working days, if not in stock, lead time will vary from 7 to 21 days.
Card transaction fees will be deducted from all transactions if we can't supply, if we need to refund, if you did not confirm stock.

**To add reflective tape to a garment - Pricing from R39ex vat per set.**

Email [email protected] for inquiries

**The actual product could differ slightly from the product image. We try to advertise with accurate pictures, but we can't be held accountable if the manufacturer changes their design.**